Skip to main content
	

Driver Brings New 3D Vision Profiles & More

In driver 334.89 NVIDIA introduced a new proprietary rendering mode for 3D Vision that enables us to improve the 3D experience for many key DirectX 10 and 11 games. This mode is now called “3D Compatibility Mode”. We have continued to iterate on this feature in driver 344.11, increasing game support and adding some new interface elements. You can get the new driver at www.geforce.com/drivers or via the update option in Geforce Experience.

With the release of 344.11, new 3D Compatibility Mode support has been added for the following games:

• Assassin’s Creed: Freedom City - rated as Excellent

• Halo: Spartan Assault - rated as Excellent

• Murdered Soul Suspect - rated as Excellent

• Sniper Elite 3 - rated as Excellent

The memo notes that you see in the lower right corner of the screen when you launch a game in 3D have been tweaked to reflect what mode is active when launching a new game or after using the toggle mechanism to turn Compatibility Mode on/off. And, a new rating category has been added to the control panel to separate ratings for 3D Vision and Compatibility Mode options. You can view this by selecting View Ratings for Games in the Stereoscopic menu in the NVIDIA control panel.

Note: Games with 3D Compatibility Mode will launch in this mode by default. To change the render mode back to standard 3D Vision mode, simply press CRTL-ALT-F11 while in-game. Press CRTL-ALT-F11 again to switch back to 3D Compatibility Mode. (To activate this toggle capability, you will need to ensure that Advanced In-game Settings is enabled in the control panel, before you start the game. Go to Control Panel > Stereoscopic 3D > Set up stereoscopic 3D > Set Keyboard Shortcuts > Show advanced in-game settings, and check “Enable advanced in-game settings”. )

In addition, the following 3D Vision profiles have been added or updated:

• Borderlands: The Pre-Sequel - rated as Fair

• Dead Rising 3 - Not recommended

• F1 2014 - rated as Good

• GRID Autosport - rated as 3D Vision Ready 

• Strife - rated as Fair.

Comments

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

Its down

I cannot upload videos! Please check it out

gians software

für ls 17

gians software

für ls 17

3D VISION app failed to detect 3D says the control panel355.98

i had a gtx580m in my dell Alienware 2012 120hertz with 3D vision kit, (glasses and built in infrared technology) i went and upgraded from the 580m to a gtx770m witch at the time i had no drivers or card installed because the 580m went bad and kept freezing my laptop, so i disabled uninstalled the drivers....so the card being disabled i went using the laptop at very limited performance without a descrete card or integrated grafix because the 3d m17xR3 does not come with intel... and finally got enough cash to get the upgrade i wanted GTX770m...went to download the drivers from NVIDIA and got the right code in the inf file so the NVIDIA system detect pass and the drivers were installed, this is were the REAL issue arised...

i went directly to the NVIDIA control panel to set up stereoscopic 3D as previously done thru dell when i had gotten the laptop for the first time... when i try and manualy install the 3d vision drivers or even run the program itt tells me that the control panel is not compatible with 3D(in other words telling me that the first generation 3D equipment that i have installed in my laptop is redundant....
(as i see i already installed all the proper drivers for the system discrete VGA in "nvidia control panel"/system information(all the way bottom left of control panel)/pop up window components "tab" will display all drivers installed and the 3D drivers are in place)
i also noticed IRQ emmiter status is by default "NOT IN USE", how can i turn the setting to in use or on status if there is any way around this so i can start playing my 3D movies and be able to run my integrated disck drive that is fully 3d capable, and most importantly the GAME end of the spectrum with this new NVIDIA GTX770M...
PLEASE HELP IF THERE IS A FIX, or maybe we can work on some code if anyone knows what code and .inf....lets do this

3D VISION app failed to detect 3D says the control pane 355.98

i had a gtx580m in my dell Alienware 2012 120hertz with 3D vision kit, (glasses and built in infrared technology) i went and upgraded from the 580m to a gtx770m witch at the time i had no drivers or card installed because the 580m went bad and kept freezing my laptop, so i disabled uninstalled the drivers....so the card being disabled i went using the laptop at very limited performance without a descrete card or integrated grafix because the 3d m17xR3 does not come with intel... and finally got enough cash to get the upgrade i wanted GTX770m...went to download the drivers from NVIDIA and got the right code in the inf file so the NVIDIA system detect pass and the drivers were installed, this is were the REAL issue arised...

i went directly to the NVIDIA control panel to set up stereoscopic 3D as previously done thru dell when i had gotten the laptop for the first time... when i try and manualy install the 3d vision drivers or even run the program itt tells me that the control panel is not compatible with 3D(in other words telling me that the first generation 3D equipment that i have installed in my laptop is redundant....
(as i see i already installed all the proper drivers for the system discrete VGA in "nvidia control panel"/system information(all the way bottom left of control panel)/pop up window components "tab" will display all drivers installed and the 3D drivers are in place)
i also noticed IRQ emmiter status is by default "NOT IN USE", how can i turn the setting to in use or on status if there is any way around this so i can start playing my 3D movies and be able to run my integrated disck drive that is fully 3d capable, and most importantly the GAME end of the spectrum with this new NVIDIA GTX770M...
PLEASE HELP IF THERE IS A FIX, or maybe we can work on some code if anyone knows what code and .inf....lets do this

Battlefield Hardline Should be marked not recommended.

Battlefield Hardline is unplayable in 3D due to huge visual glitches. Sadly this game is incompatible with 3D Vision 2. :(

there is no definition between my weapon and the world, there is a halo artifact around the weapon and huge artifacts between world and sky, and when I try to switch from compatibility mode weapon is 2D and the shaders in the left eye are so much different than the shaders in the right eye it breaks my brain in an instant.

I pray for helix to fix this game as it is unplayable in 3D as EA couldn't care less and STILL Battlefield 4 hates 3D as well. :(

Battlefield Hardline crashes

Battlefield Harline always crashes when I start it up while Stereoscopic 3D is Enabled. Any ideas?

titan x + 3d vision 2

after 5 minutes the ir sensor shot down,very time ,new future or bug??

just cause 2 3d visioin shadow and textures go black

i use to have a gtx 770 and i now have a gtx 980. they both do the same thing. an old driver for the 770 works fine for it but there isnt one good for 980 :( please fix

I MAKE UPDEAT 3445 FOR

by Anonymous - 12/22/2014 - 23:00

I MAKE UPDEAT 3445 FOR NVIDIA DRIVER AND I HAVE APROBLEME WITH 3D CARD MY CARD IS NVIDIA 660 GTX GFORCE WATH TO DO

I MAKE UPDEAT 3445 FOR

I MAKE UPDEAT 3445 FOR NVIDIA DRIVER AND I HAVE APROBLEME WITH 3D CARD MY CARD IS NVIDIA 660 GTX GFORCE WATH TO DO

zz

thank nvidia

zz

thank nvidia

zzz

thank

Thx for still doin official

Thx for still doin official 3dvision profiles!

Please Support some new games too , like evilwithin or ryse...

Video uploading is down

Video uploading is down. Please fix.

Post new comment

By submitting this form, you accept the Mollom privacy policy.

Comments